Search Results for: godex

…or setting up and loading each of the two models of GoDEX printers below, skip the above step and click on a link below. Set up and load ticket stock for GoDEX RT200i Set up and load thermal labels for GoDEX RT 200i Set up and load ticket stock for GoDEX HD90 Are your tickets not ejecting far enough from the printer to tear at the perforation? Click here to learn how to fix it…. Continue reading →

Do the tickets from your Godex printer look like someone drove over them, with lines on them? Godex recommends this solution. Completely remove the printer driver and start with a fresh install. Go to the area on your computer where you uninstall programs. To completely remove all Seagull drivers select the Remove printer drivers radio button. Click Next. Choose the Automatically remove all Drivers by Seagull radio button. Install a new driver fr… Continue reading →

…and click on “devices and printers.” In the screen shot below, you’ll see Godex RT200i #2. Your screen may or may not have the #2 designation. Don’t worry about it. Right click the GoDEX printer icon and choose Printing Preferences. This is what you’ll see: Click on the General tab, then the Preferences button. Click on the Page Setup tab, then click on the New button and create a new stock. Type in a new name called Thermal label like shown abov… Continue reading →

…Here’s a short, helpful video that shows you the proper way to load tickets in a ticket printer. Though this demonstration is for a GoDEX printer, the instructions are basically the same no matter what brand you are using. The important thing is to load them with the black marks facing down (the blank side will be facing up) and the arrow facing forward…. Continue reading →

From the Godex LCD Screen: 1. This is the Power on/off button. 2. These are four directional buttons that are used to navigate the menu. 3. This is the Enter key. Confirm that LCD screen says Ready. At the bottom of the LCD screen, confirm you see press → (right arrow key) for three seconds to enter menu. Then press the key. Once in the menu, the first window shows the option Printer Setting. Press the Enter key. Press the right arrow key → until… Continue reading →

Are you having problems with tickets not ejecting far enough from your GoDEX printer to tear at the perforation? Go to your Printing Preferences and click on the Stock tab. Check to see if the box is checked for Use Current Printer Settings. If tickets are NOT ejecting far enough to be able to tear off at the perforation, then un-check that box. It will look like this: Print a test ticket. How much further does the stub need to be ejected? If you… Continue reading →